Site scan
We check coverage and signal strength at the actual installation points.
Water, gas, electricity, temperature or fill level: small amounts of data, for years, often in difficult places. That is exactly what LTE-M and NB-IoT were built for.

A meter in a basement or a sensor in a silo should not need attention for years.
Basements, meter cupboards and concrete shafts block an ordinary 4G signal.
Every unnecessary network scan costs battery life you cannot top up.
A normal data bundle is oversized for a meter sending 2 MB a month.
Hardware stays in place for ten years, so the connectivity has to last too.
We choose together between NB-IoT, LTE-M and classic LTE.
We check coverage and signal strength at the actual installation points.
NB-IoT for static meters, LTE-M as soon as movement or voice is involved.
Tariffs sized in MB per month, shared across all meters.
Fixed rates for the duration of the roll-out project.
Meters and sensors send a few kilobytes per reading. IoT Lite with 200 MB per SIM is nearly always enough, and with pooling you pay for the total consumption of the fleet instead of reserving a bundle per card.
PER SIM CARD
Slimme meters, sensoren, tracking.
excl. VAT
Laadstations, asset tracking, vending.
excl. VAT
DATA POOL ON ONE NETWORK
Data-pool vanaf 50 sims.
excl. VAT
Data-pool vanaf 200 sims.
excl. VAT
Data-pool vanaf 500 sims.
excl. VAT
Options with this setup
All prices are monthly. SIM cards and eSIM profiles, activation and a private APN are billed separately.
Send us the number of meters and their locations, we will verify coverage.
NB-IoT is built for small, slow messages from a fixed device with deep indoor coverage. LTE-M offers more bandwidth and also works while moving.
Coverage is extensive but not identical per network. We check your locations and pick the network that scores best there.
Yes, provided the meter supports the chosen technology. We review the modem specifications with you.
With NB-IoT and the right settings, typical sensors run for several years on one battery.